|
All open issues [^] (1 - 31 / 31) |
0000318
|
Correlated data badly affected by serial link problem COR0 SEG0 RCVR4
serial links - 06-03-25 17:04
|
0000329
 
|
Baseline dependent gain errors (closure errors)
0.unknown/unspecified - 05-11-24 03:23
|
0000376
|
There is no TP on Band4,9Y.
0.unknown/unspecified - 03-08-24 12:08
|
0000419
|
There are problems in the correlator.
correlator board - 28-11-12 08:03
|
0000410
|
There is the problem from the correlator
0.unknown/unspecified - 12-07-12 12:32
|
0000408
|
8Y band 0 huge TP drops. Quite often.
0.unknown/unspecified - 12-07-12 12:24
|
0000405
|
The bad serial link problem
0.unknown/unspecified - 12-07-12 07:31
|
0000328
|
At Lband the Ampls of cross-correlations CY*Y dropped out sometimes in all bands, intermittent.
0.unknown/unspecified - 06-03-12 12:52
|
0000395
|
The problem of the DZB switch
0.unknown/unspecified - 06-02-12 13:39
|
0000346
|
No Corr. Data in CX, CY, DX & DY
correlator board - 24-01-12 14:04
|
0000311
|
Band4 6XAX,6XBX have no Ampls, intermittent.
correlator board - 24-01-12 14:03
|
0000291
|
The problem on 6X,6Y,7X,7Y in Band7
0.unknown/unspecified - 24-01-12 14:02
|
0000387
|
Sometimes serial link errors COR03
serial links - 24-01-12 13:56
|
0000380
|
There is the problem on the correlator
correlator board - 05-10-11 12:07
|
0000379
|
The problem on the COR1
correlator board - 03-10-11 14:28
|
0000356
|
DDU: One or more fans are in a bad condition (noisy)
DDU - 28-06-11 14:12
|
0000355
|
COR03: One of the Power Error LED's is glowing faint.
monitoring - 22-06-11 15:04
|
0000352
|
There is the problem on the correlator of COR03.
correlator board - 24-05-11 13:28
|
0000333
|
The TPs are low before attenuating at 3.6cm
0.unknown/unspecified - 04-03-11 16:34
|
0000220
|
Low-level baseline-dependent calibration errors
0.unknown/unspecified - 23-02-11 19:19
|
0000305
|
There is no TP of band2,1X.
0.unknown/unspecified - 25-11-10 13:33
|
0000205
|
Bad serial link of DDU presel board 2, module 0
serial links - 29-03-10 05:21
|
0000242
|
the problem on the ADC1 proc-process
0.unknown/unspecified - 28-02-10 10:37
|
0000231
|
There is the problem from the ADC5 proc-process.
0.unknown/unspecified - 18-02-10 06:21
|
0000176
|
Bad serial link of DDU presel board 2, module 0
serial links - 27-10-09 09:41
|
0000169
|
The Ampl of CYCY is too low.
0.unknown/unspecified - 01-10-09 14:26
|
0000106
|
Bad contact dataconnectors (backplane and boards)
correlator board - 23-04-09 07:16
|
0000097
|
a problem from the correlator board
correlator board - 16-02-09 07:04
|
0000094
|
2x7x en 3x6x bad correlator channels (intermittend)
0.unknown/unspecified - 07-01-09 13:13
|
0000081
|
All the amplitudes of ifrs and TPs are bad at YY in band2
0.unknown/unspecified - 12-11-08 12:10
|
0000063
|
inconsistency of Amplitude in observation with 4096 channels
0.unknown/unspecified - 11-11-08 15:18
|
