LSMTool: the LOFAR Local Sky Model Tool¶

LSMTool is a Python package which allows for the manipulation of sky models in the makesourcedb format (understood by BBS and NDPPP). Note that LSMTool is still in beta. Please report bugs on the issues page at https://github.com/darafferty/LSMTool. To initialize your environment for LSMTool, users on CEP3 should run the following command:

$ module load lsmtool

To install LSMTool elsewhere, please see the README at https://github.com/darafferty/LSMTool for instructions.

Usage¶

The command-line version of LSMTool can be run as follows:

Usage: lsmtool <skymodel> <parset> [<beam MS>]
Options:
  --version   show program's version number and exit
  -h, --help  show this help message and exit
  -q          Quiet
  -v          Verbose

The parset specifies the operations to perform and their parameters. These are described in the next sections.

Operations¶

These are the operations that LSMTool can perform:

SELECT: : Select sources by source or patch properties
REMOVE: : Remove sources by source or patch properties
TRANSFER: : Transfer a patch scheme from one sky model to another
GROUP: : Group sources into patches
UNGROUP: : Remove patches
MOVE: : Move a source or patch position
MERGE: : Merge two or more patches into one
CONCATENATE: : Concatenate two sky models
ADD: : Add a source
SETPATCHPOSITIONS: : Calculate and set patch positions
PLOT: : Plot a simple representation of the sky model
COMPARE: : Compare source fluxes and positions of two sky models

Example parset¶

This is an example parset that filters on the flux, adds a source, and then groups the sources into patches:

LSMTool.Steps = [selectbright, addsrc, grp, setpos]

# Select only sources above 1 mJy
LSMTool.Steps.selectbright.Operation = SELECT
LSMTool.Steps.selectbright.FilterExpression = "I > 1.0 mJy"

# Add a source
LSMTool.Steps.addsrc.Name = new_source
LSMTool.Steps.addsrc.Type = POINT
LSMTool.Steps.addsrc.Ra = 277.4232
LSMTool.Steps.addsrc.Dec = 48.3689
LSMTool.Steps.addsrc.I = 0.69

# Group using tessellation to a target flux of 50 Jy
LSMTool.Steps.grp.Operation = GROUP
LSMTool.Steps.grp.Algorithm = tessellate
LSMTool.Steps.grp.TargetFlux = 50.0 Jy

# Select only sources in 'Patch_1'
LSMTool.Steps.selectbright.Operation = SELECT
LSMTool.Steps.selectbright.FilterExpression = "Patch = Patch_1"

# Set the patch positions to their midpoint and write final skymodel
LSMTool.Steps.setpos.Method = mid
LSMTool.Steps.setpos.OutFile = grouped.sky

In the first line of this parset the step names are defined. In the next sections, the step parameters for every step are defined. Steps are applied sequentially, in the same order defined in the list of steps. A list of step-specific parameters is given in Table [lsmtool:tab:local_val].

Var Name	Format	Example	Comment
Operation	string	SELECT	An operation name (see Operations)
OutFile	string	out.sky	Name of output file
SELECT and REMOVE
FilterExpression	string	I > 10.0 Jy	Filter for selection
Aggregate	bool	False	Filter by aggregated patch property
ApplyBeam	bool	True	If true, apparent fluxes will be used
TRANSFER
PatchFile	string	patches.sky	File with patches that will be transferred
GROUP
Algorithm	string	tessellate	One of tessellate, cluster, single, every, voronoi, or a CASA mask file
TargetFlux	string	10.0 Jy	Target total flux of patches (tessellate only)
NumClusters	int	100	Number of clusters (cluster only)
ApplyBeam	bool	True	If true, apparent fluxes will be used
UNGROUP
MOVE
Name	string	src1	Name of source or patch to move
Position	list of floats	[12.3, 23.4]	RA and Dec in degrees to move to
Shift	list of floats	[0.001, 0.0]	RA and Dec in degrees to shift by
MERGE
Patches	list of strings	[bin1, bin2]	Patch names to merge
Name	string	merged_patch	Name of new merged patch
SETPATCHPOSITIONS
Method	string	mid	Set patch positions to mid, mean, or wmean positions
CONCATENATE
Skymodel2	string	in2.sky	Name of sky model to concatenate
MatchBy	string	position	Identify duplicates by position or name
Radius	string	30 arcsec	Radius within which matches are identified
Keep	string	all	If two sources match, keep: all, from1, or from2
InheritPatches	bool	False	Matches inherit patches from parent sky model
ADD
Name	string	src1	Name of source; required
Type	string	POINT	Type; required
Patch	string	new_patch	Patch name; required if sky model has patches
RA	float or string	12:45:30.4	RA; required
Dec	float or string	+76.45.02.48	Dec; required
I	float	0.69	Flux in Jy; required
AnyValidColumnName		value	Any valid column name can be specified
PLOT
LabelBy	string	patch
COMPARE
OutDir	string	comp_plots/	Output directory for plots
SkyModel2	string	in2.sky	Name of second sky model
Radius	string	10 arcsec	Radius within which matches are identified
LabelBy	patch	string	Label plot points by source or patch
ExcludeMultiple	bool	True	Exclude sources with multiple matches
IgnoreSpec	float	-0.7	Ignore any source in SkyModel2 with this spectral index

Interactive use and scripting¶

LSMTool can also be used interactively (in IPython, for example) or in Python scripts without the need for a parset. To use LSMTool in a Python script or interpreter, import it as follows:

>>> import lsmtool

A sky model can then be loaded with, e.g.:

>>> LSM = lsmtool.load('skymodel.sky')

All of the operations described in Section [lsmtool:operations] are available as methods of the resulting sky model object (with the same name as the corresponding operation). For example, the following commands with duplicate the steps done in the example parset given in Section [lsmtool:parset]:

>>> LSM.select('I > 1.0 mJy')
>>> LSM.add({'Name':'new_source', 'Type':'POINT', 'Ra':277.4232, 'Dec':48.3689, 'I':0.69})
>>> LSM.group(algorithm='tesselate', targetFlux='10.0 Jy')
>>> LSM.select("Patch = 'Patch_1'")
>>> LSM.setPatchPositions(method='mid')

In many cases, the methods accept parameters with the same names as those used in a parset (see the full documentation for details). The sky model can then written to a new file with:

>>> LSM.write('grouped.sky')

Additionally, sky models can be written out as ds9 region files and kvis annotation files (as well as all the formats supported by the astropy.table package, such at VOTable, HDF5, and FITS):

>>> LSM.write('outskymodel.reg', format='ds9')
>>> LSM.write('outskymodel.ann', format='kvis')
>>> LSM.write('outskymodel.fits', format='fits')
>>> LSM.write('outskymodel.hdf5', format='hdf5')
>>> LSM.write('outskymodel.vo', format='votable')

In addition to the operations described above, a number of other methods are available:

LSM.copy(): : Return a copy of the sky model object
LSM.info(): : Print information about the sky model
LSM.more(): : Print the sky model to the screen, using more-like controls
LSM.broadcast(): : Send the sky model to other applications using SAMP
LSM.getColNames(): : Returns a list of the column names in the sky model
LSM.getColValues(): : Returns a numpy array of column values
LSM.getRowIndex(): : Returns the row index or indices for a source or patch
LSM.getRowValues(): : Returns a table or row for a source or patch
LSM.getPatchPositions(): : Returns patch RA and Dec values
LSM.getDefaltValues(): : Returns column default values
LSM.getPatchSizes(): : Returns an array of patch sizes
LSM.setColValues(): : Sets column values
LSM.setRowValues(): : Sets row values
LSM.setDefaultValues(): : Sets default column values

For details on these methods, please see the full module documentation.

LSMTool: the LOFAR Local Sky Model Tool¶

Usage¶

Operations¶

Example parset¶

Interactive use and scripting¶

Table of Contents

Previous topic

Next topic

This Page